Bergen Audio Visual

Sign In or Create an Account (above) for a lower price

Brief Summary by Bergen Audio Visual -  The Bosch CCS-CUD is a control unit for the Bosch CCS 900 Ultro Discussion System.  The control unit operates the microphone system and provides feedback suppression.  The system is very easy to operate and can be set-up in minutes.  We use this system regularly for our rental inventory.  Benefits include easy set-up, superb sound quality, and ease of operation.  In most cases, the system can be operated without complicated equipment such as mixers and speakers.  The microphones connect to each other and each contain their own speaker.  Please note, we are not allowed to post pricing on these items.  Please give us a call and we can give you pricing information.  If you are in the Northern New Jersey area, feel free to come by and we can give you a product demo.

Bosch Description:

The Control Unit (CCS-CUD) is the heart of the CCS 800 and 900 Ultro Discussion System and supplies the power for all delegate and chairman units in the system. The unit also controls the chairman and delegate unit microphones, as well as providing connections for audio inputs and outputs.

Functions

Digital acoustic feedback suppression
The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as ‘howling’ or ‘Larson effect’). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback.

Discussion control without operator
The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit’s top panel:
• Open mode – allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active
• Open mode with auto-switch-off – allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds
• Override mode – delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen)
• Chairman only mode – only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking
• Test mode –checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected

Supplies power for up to 50 contribution units
The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 100 m (109.3 yards).

Provides control for up to 150 contribution units
Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system.

Built-in monitor loudspeaker
The built-in monitor loudspeaker and headphone socket allow the conference to be monitored.

Interfaces the system with external equipment

The following equipment can be interfaced to the CCS 800 and 900 Ultro Discussion System through the CU:
• External wired or wireless microphone – for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in ‘chairman only’ mode)
• External PA system – for transmitting the proceedings to an audience in the same room or an adjacent room
• Tape recorder – for external recording and playing back meetings and discussions
• Audio equipment – for providing background music
• Telephone coupler – to allow a remote delegate to participate via telephone
• External audio processing – an insertion connector is provided

Controls and Indicators

Top
• Mains on/off switch
• Graphical display for status information
• Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU.
• Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode)
• Power on LED

Back
• On/off switch for digital acoustic feedback suppression facility
• Microphone input gain adjustment (at rear of unit)
• Recorder input gain adjustment (at rear of unit)
• Insertion connector bypass switch (at rear of unit)

Interconnections

Top
• 1 x 3.5 mm (0.14 inch) stereo headphone socket Back
• 1 x AC input
• 2 x 7-pole circular female connectors, trunk in/out loop through interconnection
• 1 x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator)
• 2 x Cinch connector pairs (R/L channel), recorder input/output
• 1 x Cinch connector pair, line input/output
• 1 x Cinch connector pair, telephone input/output
• 1 x Cinch insertion input/output
• USB interface

Click Here for PDF